Oce 3000 User Manual page 46

Standard: use this mode for good quality images of normal originals.
Photo: use this mode when the originals contain halftone information or
other low-contrast features such as photographs.
Film Inverse
images.
The option is ON: The film polarity is positive (black line on white
background).
The option is OFF: The film polarity is negative (white line on black
background).
This enables a previously loaded set of image parameters to be recalled
Load
for use.
This enables the current set of parameters to be saved for future use. Up
Save
to nine different sets can be stored.
This button enables you to remove a set of imaging parameters from
Delete
the setup list.
To load a predefined imaging setup:
Open the Scanner Setup window.
1
Select the Imaging card.
2
Click the Load button at the bottom of the Imaging card.
3
On pressing this button, the following window is displayed:
2081.tif
[22] Loading an imaging setup
All predefined setups are listed. The example above displays two options.
'Working' stands for the setup as it is currently defined in the Imaging entry
box. Selecting this option leaves the imaging setup unchanged.
Click the desired setup.
4
Click OK.
5
The parameters defined in the setup are automatically fitted in the Imaging
window.
46 Océ 3000 User Manual
Use this option to set the scanner for negative or positive looking