Error Messages - Oce 3000 User Manual

Error messages

The following table provides an alphabetic list of error messages.
Error code
BTN_RUNFRAME
IDS_MSG10
IDS_MSG11
IDS_MSG12
IDS_MSG13
IDS_MSG14
IDS_MSG15
IDS_MSG16
IDS_MSG17
IDS_MSG18
IDS_MSG19
IDS_MSG20
IDS_MSG21
IDS_MSG22
IDS_MSG23
IDS_MSG24
IDS_MSG25
IDS_MSG26
IDS_MSG27
[73] Error messages
Technical specifications
Error message
Frame
Failed to start the low level machine driver program.
Maximum image line length of 32000 has been exceed-
ed.
Maximum pixel line length of 15200 has been exceeded.
Scanner failed to initialise. Please ensure the scanner is
switched on and in working order. Press OK to return to
Windows.
No write privilege for this directory. Press OK to contin-
ue with this directory or Cancel to return to the Printer
Connect dialogue box.
The specified directory does not exist. Press OK to con-
tinue with this directory or Cancel to return to the Printer
Connect dialogue box.
Printer Setup cannot be changed during scanning.
File Handling parameters cannot be changed during
scanning.
Specified scan file directory does not exist. Please try a
new directory.
Anamorphic zoom range is 5% to 2000%. Please enter a
value in range.
Network printer spool directory does not exist. Please
enter a valid drive and path.
Printer Queue directory is invalid. Please enter a valid
drive and path.
SCSI address must be in the range 0 to 7. Please enter the
required address.
No macro responses found. The 'OCE.INI' either does
not exist or has been corrupted.
No macro commands found. The 'OCE.INI' is either
missing or corrupt.
New file name already exists. Please try again.
Scan resolution is from 100 - 400 dpi. Please enter a val-
ue in this range.
This combination of width, reduction ratio and Y offset
is outside the operating region of the scanner.
101