Table of Contents
Advertisement
The following data must exist for each header record:
Record
[Record_N]
Padding character=<space|zero|any ASCII character>
Data Format=<integer|string>
Length=<length of the data field in bytes>
Offset=<offset from the start of the image file>
Data=<one of the parameter names>
Record_N is the record number in the image file header. It is starting at
Note:
zero and increases depending on the number of records you used.
As default Padding Character 'space' is used.
Note:
As default Data Format 'string' is used.
Note:
Constant from the corresponding record in the Header Template file.
Note:
Pointer in bytes to the start of this record.
Note:
The parameter is one of the following parameter names:
Note:
image size
file name
resolution
drawing size
reduction
width
length
hollerith
date and time
Defining User Defined file format
the compressed data size in bytes
the file name of the image
the resolution of the file
the size of the paper (A4, E, etc.)
the reduction ratio used on the film
the image width in pixels
the image length in pixels
the hollerith code read from the card (or edited)
system date and system time
113
Advertisement
Table of Contents
