Oce 3000 User Manual page 22

The Print Control entry box allows you to specify the desired
Print Control
settings for the selected printer output: the number of copies, the size of the
output print, etc. The look of the Print Control entry box depends on the
selected printer. You can find more information in 'The printer setup' on
page 71.
Use this button to clear cards which may be trapped in the scanner.
Clear
This button starts the Océ 3000 Microfilm Scanner process as selected
Start
(batch or single).
If Hollerith Naming is off, depending of your choice File or Print/File, the
following window appears before scanning starts:
2068.tif
[9] Image file name
This window allows you to define the root of the name for the scanned image
files, and the counter start number. In the example above, the first image file is
'scan0001', the second image file is scan0002' and so on.
If Log File Usage is on, the following window appears before scanning starts:
2069.tif
[10] Log file
This window allows you to set the name for the log file.
After defining log file and file naming, the scanning starts and the window
changes to the Run-Time Display window.
22 Océ 3000 User Manual