Table of Contents
Advertisement
Configuration
When clicking the Configuration option in the Utilities pull down menu, the
following window appears.
2122.tif
[66] The Configuration Window
The Configuration Window displays a number of entry boxes which enable
various system and hardware parameters to be set, and provides a means of
setting values which are normally fixed for a given installation.
The Start-Up settings: you can choose the factory settings for the system to
start up, or define your own start-up settings.
The Machine Offsets: the machine offsets are used to calibrate the machine
to correct for the manufacturing tolerances within the optical system. The
values are measured in microns, and the correct values are determined at the
factory during manufacture.
Hollerith Add Mode: in Single and Auto Feed modes, you can add a
'Hollerith code' to cards without Hollerith punches. The code is
automatically added to the image file when an output is generated.
Setting up the Océ 3000 Microfilm Scanner
85
Advertisement
Table of Contents
