Table of Contents
Advertisement
Error code
IDS_MSG28
IDS_MSG29
IDS_MSG30
IDS_MSG31
IDS_MSG32
IDS_MSG1101
IDS_MSG1102
IDS_MSG1103
IDS_MSG1104
IDS_MSG1106
IDS_MSG1107
IDS_MSG1108
IDS_MSG1109
IDS_MSG1110
IDS_MSG1111
IDS_MSG1112
IDS_MSG1113
IDS_MSG1114
IDS_MSG1115
[73] Error messages
102
Océ 3000 User Manual
Error message
This combination of length, reduction ratio and X offset
is outside the operating region of the scanner.
Image width * resolution is outside the range 600 to
16000 pixels. Pleas modify either the width or resolution
values.
Key name must equal the number of Hollerith elements
from which it is read. Please enter a matching name.
Cannot have a file name greater than 8 or less than 1
character. Please modify the number of checked Hol-
lerith File name elements to between 1 and 8.
Format code must match the number of Hollerith ele-
ments from which it is read. Please enter a matching
code.
Input hopper empty. Please fill the Input Hopper and
press Retry to continue. Cancel returns to the Control
screen.
Card misfeed. Please fan the cards in the Input Hopper
and press Retry to continue. cancel returns to the Control
screen.
Card edge detection failure.
Card failed to feed out of the machine.
Card failed to scan.
Unable to find a valid Hollerith format code. Image re-
jected, no data written to disk.
Maximum file length cannot exceed 8 characters. Please
modify the filename or the initial count.
Unable to identify a valid image size. Image rejected, no
data written to disk.
No templates left to delete. Press OK to continue.
The current template has been selected for deletion.
Press YES to delete the template.
Image data buffer overflow. Insufficient memory is
available to buffer this image. Please change the imag-
ing parameters or increase the amount of PC memory.
Image data transfer to PC has stopped. Check the PC to
Scanner cable connection.
Compressed image data buffer overflow. Try closing
other applications, adjusting the imaging threshold pa-
rameters or fitting more memory.
Unable to open or create Job Management Log files.
Please ensure the Log file directory exists and this PC
has write permission.
Advertisement
Table of Contents
