Oce 3000 User Manual page 50

This window contains four main parts:
Drawing Size
Drawing Size File
Units
Control buttons.
Drawing Size
the reduction ratio, the drawing width and length, the X and Y offset and the
print size. Any name up to 8 characters will do.
To add a new drawing size:
Open the Scanner Setup window.
1
Select the Drawing Size card
2
Click the Edit File button to open the Edit Drawing Size File window.
3
Click New Size.
4
Enter a name for the new size in the upper right entry box.
5
Choose the units to work with.
6
Enter the values for reduction ratio, drawing width and drawing length in the
7
appropriate entry boxes.
Click Update to add the drawing size to the Drawing Size File.
8
To delete a drawing size:
Open the Scanner Setup window.
1
Click the Edit File button to open the Edit Drawing Size File window.
2
Select the size to delete in the size list.
3
2087.tif
[28] Deleting a drawing size
Click Delete Size.
4
Click Update.
5
50 Océ 3000 User Manual
This part of the window defines the name of the drawing size,