Oce 3000 User Manual page 83

To set the Océ 9500 as default printer:
Click the name of the printer in the list of installed printers.
1
Click Set As Default Printer.
2
The name of the selected printer appears in the Default Printer box in the top
of the Printer setup window.
Select the appropriate RCF file.
3
Click Connect.
4
The Connect window appears (see figure 61 on page 81).
The Connect window allows you to select the communication interface
between your printer and the controlling PC. You can connect the printers via
a network, a SCSI port or a Centronics parallel port. If you choose the network
connection, the Network entry box becomes available, where you enter the
path to the printing spool directory.
If you choose a SCSI connection, the SCSI entry box becomes available,
where you set the SCSI address and the path to the printing spool directory.
Select the required interface for your printer in the Port box.
5
If you have selected the Centronics option, proceed with step 8.
6
If you have selected the Network option, fill in the Network entry box.
7
If you have selected the SCSI option, fill in the SCSI entry box.
8
Click OK.
9
You return to the Printer Setup window.
Click Setup.
10
The Setup window appears.
2116.tif
[64] Océ 9500 setup
The anamorphic zoom for X and Y allow you to stretch an image horizontally
or vertically. Both zoom parameters can be adjusted between 5% and 2000%
for both printers. For a normal image, set both parameters to 100%.
Set the anamorphic zoom for the X direction.
11
Set the anamorphic zoom for the Y direction.
12
Click OK.
13
You return to the Printer Setup window.
Click OK.
14
Setting up the Océ 3000 Microfilm Scanner 83