Oce 3000 User Manual page 31

Edit
Frame
Pause
Stop
More detailed information on the buttons is given below:
File/Print/Print+File
the Running Mode entry box Single, Hollerith Check or Auto Feed, is selected.
The button allows you to accept the scanned image and generate the desired
output. The card is ejected into the output hopper and the system returns to the
Control window.
This button will appear in three cases:
Continue
when on the Control window in the Running Mode entry box Batch is selected
1
when on the Control window in the Output Mode entry box View is selected
2
after selecting pause in stead of File/Print/Print+File
3
This button rejects the scanned image. No output is generated and the
Reject
system returns to the Control window. The card is ejected from the scanner.
Should the image not be optimal from the first time, you can change
Rescan
the imaging parameters and scanning resolution and then rescan the card to
obtain a better result.
In Hollerith Check mode, this button is used to accept the displayed
Accept
Hollerith code.
This button allows you to correct errors in the Hollerith coding. The
Edit
Hollerith Check window will appear to make the corrections.
To edit the Hollerith data:
Click Edit in the Run-Time Display window.
1
The Hollerith data string as read from the card is displayed. You can edit the
name for the scanned file and the drawing size settings in the entry fields.
Scanning
This button will appear, when on the Control window in
31