Oce 3000 User Manual page 2

Micro?lm scanner

Table of Contents

Océ-Technologies B.V.

This manual contains a description of the Océ 3000 and the microﬁlm scanning

that can be done with it. The introduction (chapter 1) contains a general

description of the working methods for using the microﬁlm scanner and it is

recommended that you read at least this chapter.

This manual reﬂects the following software:

Océ 3000 Windows apllication software version 4.1

Overview of scannerparts on the covers

To assist you in ﬁnding parts of the scanner quickly, an illustration of the

Océ 3000 microﬁlm scanner is presented on the inside back cover.

Safety information

This manual contains the following safety information:

Appendix B lists 'Instructions for safe use'. You are advised to read this

information before you start to actually use the scanner. Technical safety

information such as safety data sheets can also be found in appendix B.

Where applicable, cautions and warnings are used throughout this manual to

draw your attention to safety precautions to be taken.

or transmitted in any form or by any means without written permission from

Océ.

Océ-Technologies B.V. makes no representation or warranties with respect to

the contents hereof and speciﬁcally disclaims any implied warranties of

merchantability or ﬁtness for any particular purpose.

Further, Océ-Technologies B.V. reserves the right to revise this publication and

to make changes from time to time in the content hereof without obligation to

notify any person of such revision or changes.

Code number 0101953

Edition 4.0

Table of Contents