Loading Cards - Oce 3000 User Manual

Loading cards

A maximum of approximately 250 aperture cards can be loaded into the input
hopper. A card press is placed on top of the batch of cards to assure a smooth
throughput of cards. The cards are placed in the scanner as shown in the
illustration below. Depending on the setting in the Configuration menu, you
must load the cards face up or face down (see 'Configuration' on page 85).
[4] Loading cards
To load a batch of cards:
Place the first card of the batch in the input hopper, sliding it a bit forwards to
1
make sure the card is gliding under the card guide plate.
Place the rest of the cards on top.
2
Put the card press on top of the batch of cards.
3
18 Océ 3000 User Manual
2243