Table of Contents
Advertisement
Scanning information
Introduction
You can place an original either vertically or horizontally. Always align the top edge of
your original with the back edge of the glass plate (by the arrow in the top left corner) or
the back edge of the ADF.
The size of the original is automatically detected, and the document is scanned.
The machine cannot always detect the size of the original if it is a non-standard paper
size, such as a book. In this case, specify the size of the original.
Orientation on the glass plate
When you put an original on the glass plate, always put the original face down on the
glass plate.
Note:
If the top edge of the original is not aligned with the back edge of the glass plate (by the
arrow in the top left corner), your original may not be scanned correctly.
Placement on the glass plate
Placement
Vertical placement
Horizontal placement
#
Illustration
Scanning information
Chapter 2 - Use the scanner
13
Advertisement
Table of Contents
