Scanner Mode - Oce Scanner Maintenance kit User Manual

What the scanner is doing at any given moment. Here is a list

Scanner mode

of the different scanner modes:
Scanner mode
"<N/A>"
"Scanner is unsupported." The connected scanner is not a model compatible with
"Scanner is busy or turned
off."
"Programming Mode.
Firmware may be down-
loaded."
"Initializing"
"Warming Up"
"Ready"
"Not Ready. Error detect-
ed."
"Test Mode"
"Continuous self-test
mode"
"Calibrating"
"Adjusting"
"Standby"
Océ Scanner Agent
Description
Scanner not accessible. Océ Scanner Agent has not (yet)
detected the scanner.
Océ Scanner Agent.
This message is displayed while downloading firmware
to the scanner.
The scanner is in this mode when firmware is being
downloaded with the firmware.exe program.
The scanner is initializing its settings (start-up).
The scanner needs to warm up before it can function in
optimal conditions. This takes a few minutes.
The scanner is ready for scanning.
An error was detected. View the error message.
The scanner test mode is used during technical service.
The scanner is performing test operations to ensure opti-
mal performance: light profile corrections, stitching, etc.
The scanner is performing calibration of the cameras.
The scanner is adjusting its cameras.
The scanner is in standby mode when the LED indicator
is red. The Timer powers the scanner on and off from the
standby mode.
13