Software Installation; Preparing The Pc For Printing - Oce 3000 User Manual

Software installation

The Océ 3000 Window application software is contained on one CD ROM.
The setup program performs the installation process automatically and sets all
configuration parameters to their required values.
If you are using Windows NT, you must be logged in as
Note:
ADMINISTRATOR before starting the installation procedure.
To install the Océ 3000 software:
Insert the Océ 3000 installation CD ROM in the disk drive of the PC.
1
Run 'setup.exe' from the CD ROM.
2
Now follow the instructions on the screen.
3

Preparing the PC for printing

Preparing the PC for printing:
Open the Control Panel menu in Windows.
1
Select the Printers icon.
2
Add a Generic Printer (Text only) and assign the appropriate address (local on
3
LPT1, 2, etc. or Network address).
Specify the printer name: 'Centronics Printer'.
4
This name is case sensitive, and the space is required.
Note:
Do not send a test page to the printer.
5
System installation 13