Scanning In Auto Feed Mode; Cards Without Hollerith Punches; Settings In The Control Window - Oce 3000 User Manual

Scanning in Auto Feed mode

The Océ Microfilm Scanner feeds, scans and displays one card at a time and
awaits your command to print, file, reject or rescan the card. After the image
has been accepted, the card is ejected into the output hopper of the scanner. The
system automatically feeds and scans the next card and displays the image on
the screen.
The image of each card is displayed on the Run-Time Display window. The
scanner pauses and you can inspect the image. You can now change the
scanning parameters and then rescan the card until you obtain a satisfactory
image. When you are satisfied with the displayed image, you can accept the
image and send it to the required output. If the output mode is set to Print, File
or Print/File, the system then automatically produces the desired output. In the
View mode, no output is generated.

Cards without Hollerith punches

In Single and Auto Feed mode, you can add a string of Hollerith data to cards
without Hollerith punches. The special 'Hollerith Add Mode' in Configuration
of the Utilities pull down menu is designed for this purpose (see
'Configuration' on page 85). When 'Hollerith Add Mode' is on, the software
generates a string of Hollerith data for a card. This string of data is displayed
on the Run-Time Display window, placed in the header of the image data file
and stored in the LOG file if activated.

Settings in the Control window

Before starting the scanner, you set the scanning controls in the Control
window.
To start a scanning session in Auto Feed mode:
Click the Auto Feed button in the Running Mode entry box.
1
Select the Input Size or select Hollerith Sizing.
2
In Configuration of the Utilities pull down menu, set Hollerith Add Mode on
3
or off as required.
Select the required Output Mode.
4
Scanning 27