Automatic Card Selection - Oce 3000 User Manual

Automatic Card Selection

The Océ 3000 can automatically decide to scan or not to scan a card,
depending on its Hollerith string. If you activated Automatic Card Selection,
the Hollerith string of each card will be compared with a list of Hollerith
strings in a specified ASCII file.
The ASCII file may not exceed 100 Kilobytes.
Note:
Using a large ASCII file may reduce the throughput of the scanning
Note:
process.
2101.tif
[48] Automatic Card Selection card of the Scanner Setup window
You can select the following operating modes:
All cards will be scanned.
Off
Only if the Hollerith string of the card matches one of the strings in the
Match
specified file, the card will be scanned.
Not Match
strings in the specified file, the card will be scanned.
Add if Not Match
strings in the specified file, the string will be added to the file and the card will
be scanned.
Setting up the Océ 3000 Microfilm Scanner
Only if the Hollerith string of the card does not match one of the
If the Hollerith string of the card does not match one of the
69