P## Pt Response; Table 30: Point Response Table - Bosch D9112B Program Entry Manual

D9112B | Program Entry Guide | 7.0
7 Point Open/Close with a D279: Used for Point Arming and Disarming.
programmed 1. Local bells are silenced through the command center (to have bell control at the
D279 see
Cut the W1 jumper on the D279 to send
W1 jumper is NOT cut then no
programming.
Normal: The point is armed and sends
YES.
Open: The point is disarmed and sends a
Armed
Short: A short is an alarm condition.

P## Pt Response

Program Record Sheet
Default: See
Selection: 0 to D
Point Response defines the "Point Response to Opens and Shorts" for this point. Table 30 show each selection
available for controlled (non-24-Hour) point types and 24-Hour point types.

Table 30: Point Response Table

Pt Response
Controlled Points:
Armed
Armed
Disarmed
Disarmed
24-Hour Points:
Key: I = Instant Alarm, D = Delayed Alarm, T = Trouble, Blank = no response
0101
Applications for Point response 9 to D
0101
0101
Combine Point Responses 9 to D with Perimeter Point Types to create more flexible 24-hour protection.
Unlike 24-hour points, a faulted perimeter point with a Point Response of 9 to D displays at the command
center when arming. Like a 24-hour point, a point programmed this way can generate alarms whether the
area is armed or disarmed.
Combining Point Response 9 with the Local Disarmed feature provides off-site reporting when the area
is armed, but only local alarm annunciation when the area is disarmed.
Combining Point Response 9 with the Local Armed feature provides off-site reporting when the area is
disarmed, but only local alarm annunciation when the area is armed.
Bosch Security Systems | 2/04 | 74-06145-000-D
Point Index
Point Index entry 4).
Open
is YES.
Alarm Restoral
and reports are not sent if
0 1 2
I I I
Open
Short I I I
T
Open
Short T
Open I T I
I I T
Short
Point Opening
and
Close
or report is sent, regardless of the D9112
Point Closing Point Closing
.
Point Opening Point Opening
.
Local Disarmed
3 4 5 6 7
I D D I I
I I I D D
T T
T T
T I T
T I T
Point Response
Point Closing
reports. If the D279's
Local Alarm
is not sent if
is not sent if
is YES.
8 9 A B
D I I I
D I I I
I I T
I T I
EN | 72
must be
is
Local
C D
I I
I I
I
I