P## Pt Response - Bosch D9412GV2 Program Entry Manual

D9412GV2/D7412GV2 | Program Entry Guide | 4.0

P## Pt Response

Default: Refer to the program record sheet
Selection: 0 to F
Point Response
Armed Open
Armed Short
Disarmed Open
Disarmed Short
Point Response
Open
Short
Key: I = Instant alarm
D = Delayed alarm
T = Trouble
S = Supervisory
Blank = Audible or visual response
Example of Controlled point:
Point Type = 1
Point Response = 8
Perimeter point with delayed alarm response when
armed (opened or shorted) and no response when
disarmed.
Example of 24-hour point:
Point Type = 0
Point Response = 8
24-hour point with supervisory response when open
and a trouble response when shorted.
Bosch Security Systems | 5/05 | F001U003636B
Controlled (Non-24-Hour Points)
0 1 2 3 4
I I I I D
I I I I I
T T
T T
0 1 2 3 4
I T I T
I I T T I
RADXPNTS
5 6 7 8
D I I D
I D D D
T
T
24-Hour Points
5 6 7 8
I T S
T T
When programming the point response for
Inovonics Wireless Transmitters,
regardless of how the transmitter is
programmed, the D8125INV Wireless
Interface always sends the off-normal state
to the control panel as a short and a
tamper condition as an open. As a result,
typical point responses for the Inovonics
transmitters would include 0, 1, 6, 7, and E
for controlled points, and 0 and 1 for 24-
hour Burg points. When programming a
transmitter as a Fire point, use a point
response of 1.
Wireless transmitters are not UL Listed
with the D9412GV2/D7412GV2 in fire or
burglary applications. Inovonics Wireless
Transmitters, when used with the
D8125INV Wireless Interface on a
9000GV2 Series control panel, are not UL
Listed for use with fire or burglary
applications.
With Supervisory Pt Response
(S = Supervisory), the BFSK format does
not transmit fire supervisory or Non-fire
Supervisory Events. Modem format must be
used with Supervisory Point Responses.
9 A B C D
I I I I I
I I I I I
I I T I
I T I I
9 A B C D
T S S
S S S
EN | 86
E F
T
I
T
E F