L## Perim Delay - Bosch D9112B Program Entry Manual

D9112B | Program Entry Guide | 3.0

L## Perim Delay

Perimeter Delay Arm
Default: See Program Record Sheet
Selection: Blank or E
Blank Disable this function for Authority Level (L##) specified, if this item in Command Center Function
requires a passcode (P).
E Enable this function for Authority Level specified. When the passcode is entered at the command
center, the panel checks the authority level. The panel executes the function only in areas where the
passcode is authorized.
Programming in O/C Options
be generated for a particular area.
Whether
not depends on the L## Perimeter O/C prompt in Authority Lvl Assign.
Bosch Security Systems | 2/04 | 74-06145-000-D
User Interface
Perimeter O/C
Perimeter Closing
reports and subsequent
Perimeter Closing
determines whether
Opening
reports are generated by this user or
EN | 52
reports can