A# Restricted O/C - Bosch D9112B Program Entry Manual

D9112B | Program Entry Guide | 2.0

A# Restricted O/C

This item determines if this area can restrict
Restricted Opening
A
disarmed after a non-fire alarm.
Restricted Closing
A
master armed with controlled points that were faulted during the arming sequence. The sequence of reports
generated by a restricted closing are:
Default: No
Selection: Yes or No
Restrict
Yes
generate
Note:
If a passcode is not required for arming or disarming and this item is YES, the area only sends Restricted
Opening and Closing reports. In this case, restricted reports are sent without User ID.
Opening /Closing Window does not affect this report: Windows do not prevent
Opening
Opening
reports.
Do not restrict
No
Regardless of programming in Authority Levels
area when this item is programmed NO.
Bosch Security Systems | 2/04 | 74-06145-000-D
Area Wide Parameters
Opening
report refers to the panel sending an
report refers to the panel sending an
Was Forced Armed
Opening and Closing reports for this area.
Restricted Opening
and
and Closing reports from being sent. Early or late designations are NOT added to
/Closing reports when they are sent according to the rules for restricted Opening/Closing
Opening Closing
and
Closing
and report activity.
Area Opening
Area Closing
Forced Point
, ,
A# Area O/C
Closing
reports.
reports for this area.
L## Restricted O/C
report ONLY when the area is
report ONLY when the area has been
Forced Close Closing Report
, then
must be programmed YES to
Restricted
, reports are not restricted in this
EN | 32
.