A# Area O/C - Bosch D9112B Program Entry Manual

D9112B | Program Entry Guide | 2.0

A# Area O/C

Area Opening
An report is sent to the central station when each individual area is opened (disarmed). An
Closing report is sent to the central station when each individual areas is closed (armed). This report includes the
area information.
Default: Yes
Selection: Yes or No
Generate
Yes
reports to an automation system that cannot interpret multiple Area
Whether
Authority Level Assignment: The first factor is the authority level of the passcode entered. If a
passcode is required to arm or disarm, and the Authority Lvl Assign program item
disabled for the user's authority level, the report is not sent. See the User Interface Authority Lvl Assign
section,
Note:
If a passcode is not required for arming or disarming and this item is YES, the area sends Opening and
Closing reports. Since there is no need to enter a passcode, there is no authority level screening to prevent the
report from being sent.
Opening/Closing Window: The second factor is whether or not an opening or closing "window" is
in effect at the time of the opening or closing. When a window is in effect, programming in
O/C in Window
Do not generate
No
Use this selection if the panel reports to an automation system that cannot interpret multiple
Opening
Format is in use and
Note:
Even if
and closings are not reported by area when this item is NO.
Programming this item NO does NOT prevent Account Opening and Closing reports if they are enabled
A#Acct O/C
in
Bosch Security Systems | 2/04 | 74-06145-000-D
Area Wide Parameters
Area Opening and Closing
Area Opening Closing
and
L## Area O/C prompt
determines whether or not the report is sent.
Area Opening
Closing Modem Format
/ reports, or if
Opening
and
L## Area O/C
is Enabled for the authority level of the passcode used to arm or disarm, openings
.
reports for this area. Do NOT use this selection if the panel
reports are sent or not depends on two factors:
.
Closing
and reports for this area.
is programmed to NO in the Phone category (BFSK
Closing
reports are enabled).
EN | 31
Opening Closing
/ reports.
L## Area O/C
Disable
Area
Area
is