Rack Mounting The Instrument - Agilent Technologies OmniBER OTN Series Installation Manual

Installation.book Page 37 Monday, January 12, 2004 1:13 PM

Rack Mounting the Instrument

Installation Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Option 005 of the instrument is ready to mount directly into a
rack. All the hardware required is supplied with this version of
the instrument.
Item (all supplied)
Shelf
Captive Nuts (8 off) - for mounting shelf and instrument 0590-0804
Screws (4 off) - for mounting shelf
Dressed Screws (4 off) - for mounting instrument
To Rack Mount the Instrument
1 Fit the rack shelf supplied with the instrument to the rack,
following the instructions given with the shelf.
2 Fit captive nuts (4 off, supplied) to rack uprights.
3 Place instrument on shelf.
4 Connect power cord and GP-IB cable (if required) before
sliding the instrument into its final position on the shelf.
5 Fit the screws (4 off, supplied) through the flanges into the
captive nuts and tighten to a torque setting of 2 Nm.
Installation (Getting Started)
Part Number
46101-00146
2680-0278
0570-1366
2
37