Closing The Bezel - Gateway 7250R System Manual

To replace the top panel:
1
Place the top panel on the top of the chassis approximately 3/4-inch back
from the front of the server.
2
Slide the panel toward the front of the chassis 3/4-inch, securing it in
place. The tabs on the front of the top panel slide under the lip of the
front panel.
3
Replace the screws you removed earlier.

Closing the bezel

Close the bezel to prevent accidental or unauthorized access to the server
controls, hot-plug drives, and removable media drives. To close the bezel,
swing the bezel up and press it firmly into place.
Closing the case
21