Table of Contents
Advertisement
Error message
Insert bootable media device See "The system does not recognize a SCSI drive" on
Insufficient disk space
Invalid configuration
information
Invalid password
Keyboard clock line failure
Keyboard controller failure
Keyboard not detected
Keyboard stuck key failure
Memory errors were
detected while the system
powered up
Memory size error
Non-system disk or disk error Eject the diskette, then press E
Not enough memory
Print queue is full
Solutions
page 89 for a possible solution.
Backup your files as soon as possible.
Check the free space on the disk volume. If the volume is
full or almost full, remove unnecessary files.
Open the BIOS Setup utility, then make sure the settings
are correct.
Enter your password again, make sure to enter it correctly.
Be aware that some passwords are case sensitive.
If you do not know the password, you may need to reinstall
the software you are trying to access.
Startup passwords are stored in BIOS. If this password has
been set and is unknown, you may be able to reset the
password via system board jumper settings.
Try a working keyboard.
Make sure that the keyboard is compatible with the system.
You may have to change the switch setting to AT.
Try a working keyboard.
Make sure that the keyboard is compatible with the system.
You may have to change the switch setting to AT.
See "The keyboard does not work" on page 94 for a
possible solution.
Turn off the system, then check the keyboard cable.
Remove any objects that may be resting on the keyboard,
then restart the system.
Check for sticking keys. Clean the keyboard if necessary.
See "The system detected memory errors during start up"
on page 89 for a possible solution.
Enter the BIOS Setup utility and save the memory
configuration.
If the diskette is bootable, check it for errors.
Close all programs that are not currently in use.
Wait until the current print job has completed before sending
another print job.
If you receive this error often, you need to add memory to
the printer.
.
NTER
Error messages
99
Advertisement
Table of Contents
Troubleshooting
