Table of Contents
Advertisement
3
Pull open the socket clamps on each side of the DIMM socket, then lift
the DIMM out of the socket. Store the DIMM in an anti-static container.
4
Insert the new DIMM into the socket, aligning the two notches in the
DIMM with the two notches in the DIMM socket.
5
Gently press the DIMM into the socket until it is firmly seated. Inserting
the DIMM automatically locks the socket clamps on each end of the
DIMM.
6
Close the case. (See "Closing the case" on page 20.)
7
Reconnect the peripherals and the power cord, then turn on the system.
34
Replacing and Adding Internal Devices
Advertisement
Table of Contents
Troubleshooting
