B System Specifications - Gateway 7250R System Manual

System
Specifications
The following specifications are for the standard configuration. The server
may contain optional equipment. All specifications are subject to change.
Case size
Processors
Cache
RAM
BIOS
IDE interfaces
Diskette drive interface
I/O ports
Power supply
SCSI interfaces
Network interface
Server management
Expansion slots
Drive Bays
18.9 in. (480 mm) x 24.1 in. (612 mm) x 3.46 in. (88 mm)
®
As many as two Intel Pentium III™ processors operating at 600 MHz
and faster
256K on processor
Four DIMM sockets support up to 2.0 GB of PC/100 SDRAM
Flash BIOS for easy updates from diskette
Two PCI IDE controllers support as many as two ATAPI/IDE devices
each (hard drives or CDs) for a total of as many as four IDE devices.
(The chassis supports only the slimline CD drive.)
Diskette drive controller is integrated on the system board
One parallel port, two serial ports, two USB ports, one PS/2 keyboard
port, one PS/2 mouse port, one RJ-45 network port
275 W power supply
Integrated Adaptec AIC 7896 SCSI controller
Intel 82559 PCI ethernet controller
Monitoring, alerting, and logging of critical system information obtained
from embedded sensors on the system board, including thermal levels,
voltage levels, fan speeds, and chassis intrusion monitoring.
Two 32-bit, 33 MHz PCI slots on the riser card
One slimline CD drive bay, one external 3.5-inch drive bay (occupied
by diskette drive), and four hot-plug bays (at least one is occupied by
a 1-inch high hot-plug drive).
B
System Specifications
115