Using the BIOS
Setup Utility
About the BIOS Setup utility
The server BIOS has a built-in setup utility that lets you configure several basic
system characteristics. The settings are stored in battery-backed RAM and are
retained even when the power is off.
Enter the BIOS Setup utility by restarting the server, then pressing F2 when
prompted during the startup process. The Main BIOS Setup utility screen
opens. It may not look exactly like the screen shown below.
Main
Advanced
Legacy Diskette A:
Legacy Diskette B:
Hard Disk Pre-Delay:
Primary IDE Master:
Primary IDE Slave:
Secondary IDE Master:
Secondary IDE Slave:
Processor Settings:
F1 Help
E
Exit
SC
BIOS Setup Utility
Security
Server
System Time:
[xx:xx:xx]
System Date:
[xx/xx/xxxx]
[
]
[
]
[enabled]
[auto]
[
]
[
]
[
]
Language:
[English (US)]
Select Item
-/+ Change Values
Select Menu
E
Select > Sub-Menu
NTER
Boot
Exit
Item Specific Help
F9 Setup Defaults
F10 Save & Exit
About the BIOS Setup utility
5
65