Hot-plug backplane
Back of the hot-plug backplane board
SCSI connector connects the SCSI cable from the RAID controller.
Power connector connects the power cable from the power supply.
Front panel connector carries signals from the backplane to the front panel.
Front of the hot-plug backplane board
SCSI ID 0
SCSI ID 2
SCA SCSI drive connectors (4) connect the four SCA SCSI drives. Install drives
in increasing order of SCSI ID.
8
System Features
SCSI connector
Power connector
Jumper block
Front panel connector
SCSI ID 1
SCSI ID 3