Table of Contents
Advertisement
5
Align the new processor with the processor slot. Note that the processor
slot is keyed so the processor can only be installed one way. Press it firmly
to install it.
6
Connect the processor fan cable to the secondary processor fan connector
on the system board (See "System board" on page 6 for location).
7
Close the case. (See "Closing the case" on page 20.)
8
Reconnect the power cord and all other cords you removed, then turn
on the system.
Important
42
Replacing and Adding Internal Devices
Gateway recommends that you run a processor retest from
the BIOS Setup utility whenever you replace or add a
processor.
Advertisement
Table of Contents
Troubleshooting
