Closing The Case; Replacing The Top Panel - Gateway 7250R System Manual

3
Remove the three screws from the top edge of the back panel.
4
Slide the top panel slightly to the back, disengaging the top edge of the
panel from the top of the front panel.
5
Lift the panel out and away from the chassis.

Closing the case

Close the chassis as soon as you finish installing or removing components
so that dust and dirt do not collect inside the server.

Replacing the top panel

You must replace the top panel before you can operate the server. If you do
not, a system intrusion event is logged by the system management hardware.
Be careful not to pinch any cables in the panel as you replace it.
20
Case Access