Installing The Bezel - Gateway E-9425R User Manual

CHAPTER 2: Setting Up Your Server
You must support the server while
installing or removing the front and back
mounting screws. If the server is not
supported, damage to the server or injury

Installing the bezel

16
Align the mounting screw holes in the server handles with the front
8
mounting nuts, then secure the front in place with two mounting screws
(one on each side).
Warning
may result.
To install the bezel:
With the server pulled out from the cabinet, align the holes in the handles
1
with the holes in the sides of the server.
Server
Mounting screw
Server (side)
Mounting screw
www.gateway.com
Mounting screw
Handle