Load Paper In The Optional Tray 8 (Post-Process Inserter) - Xerox 4590 User Manual

2. P a p er an d o th e r m e di a

Load paper in the optional Tray 8 (post-process inserter)

2- 1 2
The Post-Process Inserter is meant for loading paper (blank,
copied paper, and so forth) to be used as separators and covers.
Media loaded here will not be used to make copies.
NOTE: When adding paper to the Post-Process Inserter, remove
any paper remaining in the tray, add it to the stack of paper
to be added, then load all of the paper into the
Post-Process Inserter at once.
Hold the center of the paper guides and slide them to the
1.
desired paper size.
Load the paper, aligning to the front side of the tray.
2.
X e r o x 4 5 90 E P S /4 11 0 E P S Us e r G ui d e