Assigning A Feature To The Screens And Buttons; Enabling Stored Programming - Xerox D95 System Administration Manual

Administrator overview
• Specific screens may be displayed after the machine is turned on, when it exits the
Energy Saver mode, and/or after Auto Clear is selected.

Assigning a feature to the screens and buttons

1. Log in as the administrator.
2. Press the Machine Status button on the control panel.
3. Touch the Tools tab on the UI.
The UI displays the System Settings screen.
4. Select System Settings > Common Service Settings.
5. Select Screen/Button Settings.
• To set or change the default screen, select Screen Default.
• To set or change a button on the UI, select the desired custom button option. For
example, you can select the order in which icons display on the Services Home
screen, or select how Job Type displays on the Completed Jobs screen for Job
Status.
6. Select Change Settings.
7. Select the desired setting for the feature.
The choices are shown on the displayed list.
8. Select another feature to set or change and repeat the previous steps as needed.
9. Select Save.
The previous screen displays.
10. Select Close.
The main Tools tab screen displays.
11. Exit the administrator mode.

Enabling Stored Programming

The Stored Programming feature allows you to store the settings of a commonly used
job. If this feature is not on your Services Home menu, you can add it to that menu.
1. Log in as a system administrator.
2. From the Tools tab, select System Settings > Common Services Settings.
3. Select Screen/Button Settings.
4. Select Services Home, and then select Change Settings.
5. Select Add, scroll to Stored Programming, and select Save.
6. Log out as the administrator for the changes to take effect.
1-2 Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide