The operator can be used with the following UL Approved entrapment devices in compliance with UL325 requirements active starting August 29, 2010.
UNTIL ONE OF THESE MONITORED EXTERNAL ENTRAPMENT DEVICES IS INSTALLED, THE OPERATOR WILL NOT ALLOW MOMENTARY CONTACT OPERATION IN THE CLOSE DIRECTION.
APPROVED DEVICES
Miller Edge ME, MT & CPT series monitored edge sensors used in combination with either the Genie®
Timer-Close Module or Direct connect through STB inputs.
Safe-T-Beam® from Genie®—P/N 38176R.
Commercial Photoeye Kit—P/N OPAKPE.S.
Monitored Photocells—P/N OPAKPEN4GX.S.
STEEL, NON-INSULATED
UL
Model
HP
L is ted
16GA.
18GA.
297
333
GCL-J&H
1/2
YES
359
419
GCL-J&H
3/4
YES
GCL-J&H
1
YES
388
461
Note: Total door weight and not square footage is the critical factor in selecting the proper operator. These Sq.Ft. measurements are based on square doors, e.g. 16' x 16'.
Unbalanced Fire Shutters have a maximum square footage of 52 for 22GA. steel and 42 for 20GA. steel.