Low Voltage Control Wiring - Genie GCL-J&H Installation Manual

Low Voltage Control Wiring (general) Fig. 2
1) Connect all LOW VOLTAGE control circuit wires to this end of
electric box using 1/2" conduit or flexible convoluted tubing.
• Keep low voltage and line voltage wires separate.
• Route all low voltage control wiring as shown. This includes
all control circuit wires such as wall controls, timers and single
button input devices as well as radio control and safety
circuit wiring. See Figs 2 through 10 in this section.
• Plug all unused conduit holes.
NOTE: For a detailed description of control wire terminals see Appendix B.
GCL-J&H
Standard Duty Operator
www.geniecompany.com
ROUTE LOW VOLTAGE WIRING
IN THE SHADED AREA AS SHOWN
Optional
LOW
Accessory
VOLTAGE
Modules
INPUT
PLUGS
(Left &
Right)
Figure 2
0 -12
LOW VOLTAGE
CONTROL WIRE
TERMINALS
5.2