Service & Maintenance - Genie GCL-J&H Installation Manual

Maintenance Schedule
The following table provides a schedule of recommended Service and
Maintenance items to be completed by a trained service representative.
CAUTION:
Failure to perform the recommended Service &
Maintenance may result in premature failure of the operator.
SERVICE ITEM
MANUAL OPERATION
OF DOOR
CHECK DRIVE CHAINS
AND LUBRICATE
*
PHOTOCELL/ SENSING EDGE
OPERATION
CLUTCH (OPTIONAL)
ADJUSTMENT
CHECK FOR LOOSE
OR MISSING HARDWARE
CHECK LIMIT
POSITION
GEAR TRAIN
WEAR
* If Installed.
GCL-J&H
Standard Duty Operator
Section 9: Service and Maintenance
SERVICE INTERVAL (FREQUENCY)
EVERY 6 MO.
MONTHLY OR
5,000 CYCLES
www.geniecompany.com
EVERY 12 MO. EVERY 36 MO.
OR OR
10,000 CYCLES 30,000 CYCLE
9.1
0 -12