Ipsec Vpn Spa Overview; Ipsec Vpn Spa Leds - Cisco Catalyst 6500 Series Hardware Installation Manual

Chapter 3 Catalyst 6500 Series Switch SPA Overview
Table 3-37
SFP Modules
SFP-GE-Z
1. Multimode fiber (MMF) only.
2. Dispersion-shifted single-mode fiber-optic cable.
The 1000BASE-ZX SFP modules provide an optical power budget of 21.5 dB. You should measure your
Note
cable plant with an optical loss test set to verify that the optical loss of the cable plant (including
connectors and splices) is less than or equal to 21.5 dB. The optical loss measurement must be performed
with a 1550-nm light source.

IPSec VPN SPA Overview

The following sections describe the IPSec VPN SPA:
•

IPSec VPN SPA LEDs

The IPSec VPN SPA has one LED, as shown in
Figure 3-42
VPN SERVICES SPA
1
OL-9041-04
SFP Module Port Cabling Specifications (continued)
Wavelength
(nm)
1550
IPSec VPN SPA LEDs, page 3-57
IPSec VPN SPA Faceplate
STATUS LED
Core Size
Fiber Type (micron)
SMF 9/10
2
SMF 8
Figure 3-42.
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
IPSec VPN SPA Overview
Modal
Bandwidth Maximum
(MHz/km) Cable Distance
— 49.7 miles
(80 km)
— 62.1 miles
(100 km)
1
SPA-IPSEC-2G
3-57