Table; Quantity - Cisco MDS 9000 Series Rack Installation

Appendix 1 Rack Installation
Before Installing the Rack-Mount Support Brackets
Before installing the rack-mount support brackets for the Cisco MDS 9250i switch, check the contents
of your kit.

Table 1-1

Quantity

2
20
20
Installing and Removing the Brackets
This section provides information on how to install and remove brackets.
Before installing the shelf brackets, check the contents of your kit.
optional shelf bracket kit.
Table 1-2
Quantity
2
2
1
2
16
16
Required Equipment
You need the following equipment for this installation:
•
•
OL-29583-01
Table 1-1 lists the contents of the optional shelf bracket kit.
Contents of Shelf Bracket Kit
Part Description
Bottom support brackets
12-24 x 3/4-in. Phillips screws
M6 x 19 mm Phillips binder-head screws
Contents of Shelf Bracket Kit
Part Description
Slider brackets
Shelf brackets
Crossbar
10-32 x 3/8-in. Phillips pan-head screws
12-24 x 3/4-in. Phillips screws
10-24 x 3/4-in. Phillips screws
Number 2 Phillips screwdriver
Tape measure and level (to ensure shelf brackets are level)
Cisco MDS 9250i Multiservice Fabric Switch Hardware Installation Guide
Installing and Removing the Brackets
Table 1-2 lists the contents of the
1-3