Peripheral Configuration - NEC Express 5800 User Manual

4-14 System Configuration

Peripheral Configuration

Select "Peripheral Configuration" on the Advanced menu to display the following screen.
Serial Port A:
Serial Port B:
F1 Help
Esc Exit
See the table below for setup options on the screen.
IMPORTANT:
Make sure to avoid any conflict in the interrupt requests or the base I/O
addresses.
Option
Serial Port A
Serial Port B
Phoenix BIOS Setup Utility
Advanced
Peripheral C nfi o guration
[3F8, IRQ 4]
[2F8, IRQ 3]
Select Item -/+
Select M enu Enter Select
Parameter
Disabled
3F8, IRQ 3
*1
[3F8, IRQ 4]
*2
[2F8, IRQ 3]
2F8, IRQ 4
3E8, IRQ 3
3E8, IRQ 4
2E8, IRQ 3
2E8, IRQ4
Auto
Change Values F9 Setup Defaults
Sub-Menu F10 Save Changes & Exit
Description
Enable or disable the serial port A and
B, or specify a base address and
interrupt.
*1 Factory setting for the serial port
A
*2 Factory setting for the serial port
B
Item Specific Help
Disables serial port 1
or sets the base
address/IRQ of
serial port 1.
Your Setting
[ ]: Factory-set