Monitoring Configuration - NEC Express 5800 User Manual

Monitoring Configuration

Select "Monitoring Configuration" on the Advanced menu to display the following screen.
F1
Esc Exit
See the table below for setup options on the screen.
Option Parameter Description
Option ROM Disabled
Scan Monitoring [Enabled]
Option ROM 1 - [5] - 20
Monitoring
Time-out
Boot Monitoring Disabled
[Enabled]
Boot Monitoring 1 - [10] - 20 Specify the boot monitoring time-out period. This
Time-out Period
POST Pause Disabled
Monitoring [Enabled]
Phoenix BIOS Setup Utility
Advanced
Monitoring Configuration
Option ROM Scan Monitoring:
Option ROM Monitoring
Boot Monitoring:
Boot Monitoring Time-out Period:
POST Pause Monitoring:
POST Pause Monitoring Time-out:
Select Item
Enter Select
Select Menu
Displayed only when "Enabled" is selected for "Option ROM Scan
Monitoring", "Boot Monitoring" or "POST Pause Monitoring".
Enable or disable the Option ROM scan monitoring
feature.
Specify the Option ROM monitoring time-out
period. This option is displayed only when
"Enabled" is selected for "Option ROM Scan
Monitoring".
Enable or disable the boot monitoring feature. This
function is unique to NEC Express5800/ft series:
detects errors until the OS boots up, and
immediately reboots the OS upon detection of an
error. (For details, see "Behavior at Occurrence of
Error" in Chapter 2.) Enable this function if NEC
ESMPRO Agent is installed on the OS. Disable this
function if NEC ESMPRO Agent is not installed or
when you install the OS. Otherwise, the OS will
boot up after "Specified boot timeout."
option is displayed only when "Enabled" is selected
for "Boot Monitoring". If you specify a shorter period
of time to "Boot Monitoring Time-out Period", the
time until rebooting can be reduced. When there is
no external device connected, it is possible to set a
shorter period of time, but 3 minutes or longer is
recommended. Appropriate value for the setting
varies depending on your environment. Therefore,
when changing this setting, evaluate it thoroughly
after constructing the environment.
Enable or disable the POST monitoring feature
during boot-up restriction.
Option ROM Scan
[Disabled]
Monitoring features
[5]
[Enabled]
[8]
[Enabled]
[3]
-/+ Change Values F9 Setup Defaults
Sub-Menu F10 Save Changes & Exit
System Configuration
Item Specific Help
Your Setting
4-15