NEC Express 5800 User Manual page 287

7-34 Troubleshooting
"Source:
Event ID:
Description: Adapter link down: Stratus emb-82544GC Copper Gigabit Adapter
"Source:
Event ID:
Description: Secondary Adapter is deactivated from the Team: Stratus
"Source:
Event ID:
Description: Team #X: The last adapter has lost link. Network connection has
"Source:
Event ID:
Description: Initializing Team #X missing adapters. Check the configuration to
If the following logs are recorded after the above logs are recorded, there is no real
problem on operation by the above errors or warnings. When the following logs are
not recorded, if the log of the source "sragbe" is not recorded, there is no real problem
on operation by the above errors or warnings.
"Source:
Event ID:
Description: Secondary Adapter has rejoined the Team: Stratus emb-82544GC
"Source:
Event ID:
Description: Adapter link up: Stratus emb-82544GC Copper Gigabit Adapter."
"Source:
Event ID:
Description: Team #X: An adapter has re-established link. Network connection
ESMCpuPerf-related logs are recorded in the system event log:
→ If NEC ESMPRO Agent cannot get performance information from the OS due to a
temporary resource shortage or high load ratio on the system, it will record the
following event log. However, there is no real problem on operation (In the
description, Y and Xrepresent alphanumeric characters).
Source:
Event ID:
Description: Cannot get system performance information now (YYYY
If NEC ESMPRO Agent cannot get information, it will treat the load ratio as 0%.
So, if NEC ESMPRO Agent cannot get information continuously, the CPU load
ratio may appear lower than the actual value.
iANSMiniport
11
#2."
iANSMiniport
13
emb-82544GC Copper Gigabit Adapter #2."
iANSMiniport
16
been lost."
iANSMiniport
35
verify that all the adapters are present and functioning."
iANSMiniport
14
Copper Gigabit Adapter."
iANSMiniport
15
iANSMiniport
17
has been restored."
ESMCpuPerf
9005
Code=xxxx).