NEC Express 5800 User Manual page 112

3-38 Windows Setup and Operation
Remove the other adapter in the same way.
<For on-board >
-
-
<For option board >
-
-
-
4.
Right click [Team #1:Adaptive Fault Tolerance Mode] and select [Remove].
At that time, the dialog box shown on the right is displayed. This is a message for
confirmation, so click [Yes] button.
Remove all teams displayed on the [Intel PRO Set II] dialog box in the same manner.
Status emb-82559 10/100 Enet Adapter
Status emb-82544GC Copper Gigabit Adapter
Status AA-U51500 10/100 Enet Adapter (100BASE-TX)
Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)
NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)