NEC Express 5800 User Manual page 52

Hide thumbs Also See for Express 5800:
Table of Contents

Advertisement

2-18
General Description
LED indications
Primary
Secondary
Amber
Off
Amber
Off
(blinking
every 1
second)
Red
Off
1
ANY*
Red
1
ANY*
Red
(blinking
every 0.5
second)
1
Red
ANY*
(blinking
every 1
second)
Description
Detected a fatal
temperature error.
Detected a fatal voltage
error.
Detected a temperature
error to be warned.
Detected a voltage error to
be warned.
Detected a device defect.
Detected a fan alarm.
BMC is being dumped.
PCI module may be
connected incorrectly.
BMC may be out of order.
BMC is being dumped.
PCI module may be
connected incorrectly.
BMC may be out of order.
Transfers data being
synchronized after a PCI
module is replaced (this is
not an error).
The revision of BMC
firmware does not match.
Action
If LCD displays some error message,
refer to the error message list (see
Chapter 7).
Check if dust is accumulated on internal
fans and confirm that the fan cables are
connected firmly. If the message does
not disappear, contact your sales agent.
Contact your sales agent.
If LCD displays some error message,
refer to the error message list (see
Chapter 7).
Check if dust is accumulated on internal
fans and confirm that the fan cables are
connected firmly. If the message does
not disappear, contact your sales agent.
Contact your sales agent.
If LCD displays some error message,
refer to the error message list (see
Chapter 7).
Check if dust is accumulated on internal
fans, and confirm that the fan cables are
connected firmly. If the message does
not disappear, contact your sales agent.
Wait for a while; it will go off soon.
Check if PCI module is connected
correctly. Look for loose screws.
BMC firmware may need
reprogramming. Contact your sales
agent.
Wait for a while. After a while, the BMC
status LED on the secondary will blink.
Check if PCI module is connected
correctly. Look for loose screws.
BMC firmware may need to be
rewritten. Contact your sales agent.
Do not remove either of the PCI
modules or control the AC/DC power
until the LED stops blinking.
Contact your sales agent.

Advertisement

Table of Contents
loading

Table of Contents