NEC Express 5800 User Manual page 92

3-18 Windows Setup and Operation
3.
Start [RDR Utility].
IMPORTANT:
If the inserted disk does not appear on the tree, from the menu of [RDR Utility], select
[Action(A)] and click [Refresh(R)] or press F5 to update the display after awhile.
The display of [RDR Utility] is not updated automatically. Therefore, update it by
clicking [Refresh(R)] from [Action(A)] or pressing F5 on the menu after performing
operations described below.
4.
On the left tree of [RDR Utility], right-click a disk to set RDR and click [Add RDR Virtual
Disk].
IMPORTANT:
Depending on the disk type, RDR setting may take some time and [RDR Utility] may pause
for a few minutes. There is no error, so wait until the process is completed.
IMPORTANT:
When RDR is set to a disk containing the boot partition, the following pop-up message
appears, and clicking [Yes] reboots the system automatically in 2 minutes. Follow the steps
5 and on after the restart.