NEC Express 5800 User Manual page 149

4-30 System Configuration
Start Procedure
Start Fast!UTIL in the procedure below:
1.
Turn on the power of the server.
The start message appears on a screen in the middle of POST.
2.
Press Q and Ctrl together.
Fast!UTIL is started.
IMPORTANT:
x" or later appears.
<Example>
QLogic Corporation
QLA 1216x PCI SCSI ROM BIOS Version X.XX
Copyright (C) QLogic Corporation 1993-2001 All rights reserved.
www.qlogic.com
Press <CTRL-Q> for Fast!UTIL
ISP12160 Firmware Version xx.xx.xx
QLogic Adapter using IRQ number X
Device
Number
81
3.
Highlight "Select Host Adapter" using the cursor keys and press Enter.
Press these keys before message "QLogic Adapter using IRQ number
Device Adapter SCSI
Type Number
Disk 0
Fast!UTIL Options
Configuration Settings
Scan SCSI Bus
SCSI Disk Utility
Select Host Adapter
Exit Fast!UTIL
SCSI Vendor
ID LUN ID
0 0 SEAGATE ST32550
Product Product
ID Revision
7394