NEC Express 5800 User Manual page 136

See the table below for setup options on the screen.
Option
On Board SCSI
On Board LAN 1, 2
PCI Slot 1 - PCI Slot 3
IMPORTANT:
For the slot which a graphical accelerator board is installed, do not specify "Disabled".
Parameter Description
Disabled Enable or disable expansion of SCSI
BIOS on the motherboard.
[Enabled]
Disabled LAN1: Enable or disable 10/100BASE
LAN controller on the
[Enabled]
motherboard.
LAN2: Enable or disable 1000BASE
LAN controller on the
motherboard.
Disabled Enable or disable BIOS on a device
(board) connected to the PCI bus.
[Enabled]
Select "Enabled" for the graphic
accelerator board. Always select
"Enabled" for the SCSI PCI device to
which the hard disk that contains OS
is connected.
Select "Disabled" for Option ROM of
PCI LAN device when the network
boot feature is not used.
System Configuration
Your Setting
#1:
#2:
#3:
[ ]: Factory-set
4-17