System Hardware - NEC Express 5800 User Manual

System Hardware

Move the cursor onto "System Hardware" to display the System Hardware menu.
To make a selection for "Thermal Sensor", "Wake On Event", and "Console Redirection", first
select a desired option and press Enter to display its submenu.
See the table below for setup options on the screen.
Option Parameter
AC LINK Stay Off
[Last State]
Power On
Waiting time [0], 10~3600
for AC-LINK
Error Log Enter
Initialization
IMPORTANT:
It is recommended that "Waiting time for AC-LINK" be 3600 when you use
UPSs in the redundant configuration.
Description
Specify the AC LINK feature by selecting the
status of the power supply unit of the server
when the AC power supply restarts. (See the
table on the next page for details.) Do not
select the parameters other than "Stay Off"
when "Enabled" is selected for "Wake On
Lan."
Set maximum waiting time in second for
AC-LINK. If either of ACs is not supplied in
time, the system will be turned on as simplex
config. Value 0 means the system waits
eternally.
Range [0 or 10-3600sec.]
Press Enter to initialize the error log. The
message "Error Log Cleared" appears upon
successful completion. If failed, the message
"Error Log Not Cleared!" appears.
System Configuration
Your Setting
[ ]: Factory-set
4-21