NEC Express 5800 User Manual page 57

Hide thumbs Also See for Express 5800:
Table of Contents

Advertisement

PCI#1
Status
DISK
Status
LED 2
Access
LED 2
LED
Green
Off
(4) Status LED of only PCI module 2 is red
PCI#1
Status
DISK
Status
LED 2
Access
LED 2
LED
Amber
Amber
Amber
Amber
Green
Off
Off
Off
Off
Green
PCI#2
DISK
Access
LED
Off
Off
The PCI module 1 is
performing diagnosis
(Diag).
AC power is not
supplied to the PCI
module 2.
PCI#2
DISK
Access
LED
Off
Off
The PCI module 2 is on
standby (The PCI
module 2 has not been
powered on yet.)
The PCI module 1
operates in simplex
mode.
Off
The PCI module 2 is
performing diagnosis
(Diag).
The PCI module 1
operates in simplex
mode.
Off
Off
Only the PCI module 2
is on standby (AC
power is supplied
through the cord, but
the system has not
been powered on yet.)
AC power is not
supplied to the PCI
module 1.
Off
The PCI module 2 is
performing diagnosis
(Diag).
AC power is not
supplied to the PCI
module 1.
General Description
Description
Wait for the OS to start. After
the OS starts, check the
status LEDs and then take the
appropriate actions.
If the problem persists,
contact your sales agent.
Description
Start the PCI module 2 from ft
server utility (See pages 3-39
through 3-41).
Remount the PCI module 2.
If the problem persists,
contact your sales agent.
Wait for the PCI module 2 to
start. When the PCI module 2
starts and duplex mode is
established, the indications
will return to normal.
Check if the power cord is
connected correctly.
Check the condition of
breaker and UPS.
Check if the power unit is
connected correctly.
Remount the PCI module 1.
If the problem persists,
contact your sales agent.
Wait for the OS to start. After
the OS starts, check the
status LEDs and then take the
appropriate actions.
If the problem persists,
contact your sales agent.
2-23
Action
Action

Advertisement

Table of Contents
loading

Table of Contents