NEC Express 5800 User Manual page 95

Removing duplex configuration of RDR disks
This section describes how to remove duplex configuration from the disk with RDR setting.
In the example below, the duplication setting of the disks in the Slot 2 of the PCI modules for Group
1 and for Group 2 is removed.
IMPORTANT:
You cannot break the duplex setting of the following disks:
Disk containing the boot partition or volume
Disk containing page files
Dynamic disk
1.
Start [RDR Utility].
2.
Right-click the disk to deactivate RDR and click
[Deactivate RDR Virtual Disk].
3.
In the [Warning] dialog box, click [Yes].
4.
The RDR setting is removed from the target disk.
IMPORTANT:
When the disk does not appear on the tree, update it
by clicking [Refresh(R)] from [Action(A)] or
pressing F5.
The display of [RDR Utility] is not updated
automatically. When any operation is performed to
a disk, update the display manually.
Windows Setup and Operation 3-21