NEC Express 5800 User Manual page 221

5-58 Installing and Using Utilities
Procedure in ft server utility
Save the image data of the update firmware in a desired directory of the NEC
1.
Express5800/ft series.
Save the image data in some manner. Write down the path to the directory in which the
image data is saved.
Select the target component with the ft server utility.
2.
Check the current state of the target component with the LEDs. If the component is
3.
operating, stop the component.
Click the [Firmware Update] button for the target component.
4.
Sample screen of ft server utility
Select [Specify new firmware for update], enter the
5.
directory in which the updated firmware specified
in the input box in step 1 is saved, and click the
[Run] button.
Perform the firmware update.
Check the update result with the event log.
6.
[CPU Module]